Reach-In Refrigerator & Freezer Maintenance Checklist
A printable reach-in refrigerator and freezer service checklist with temperature and amp readings. Add your logo, print or save as PDF.
How to use| Item | OK | Needs attention | N/A | Notes |
|---|---|---|---|---|
| Readings | ||||
| Cabinet temp: setpoint ( °F) / actual ( °F) | ||||
| Product temp ( °F) | ||||
| Compressor amps ( A) / RLA ( A) | ||||
| Supply voltage ( V) | ||||
| Suction / discharge if ports fitted ( / psig) | ||||
| Defrosts per day () / termination ( °F or min) | ||||
| Cabinet | ||||
| Door gaskets sealing (paper test), no tears | ||||
| Doors self-close, hinges and cams OK | ||||
| Door / frame heaters working (freezer) | ||||
| Thermometer or display accurate | ||||
| Interior light, shelves and clips OK | ||||
| Cabinet level, casters locked | ||||
| Refrigeration | ||||
| Condenser coil cleaned | ||||
| Condenser fan motor and blade OK | ||||
| Evaporator coil clean, no ice | ||||
| Evaporator fan running | ||||
| Drain line clear, condensate pan / heater OK | ||||
| Compressor: start relay and overload OK, no oil | ||||
| Cord, plug and electrical connections OK | ||||
| Leak check on accessible lines | ||||
How to use
- The reach-in template is already loaded, with readings, cabinet and refrigeration sections.
- Add your business name, logo and the job details, or leave them blank to fill in by hand.
- Edit, add, remove or move items and sections. The preview updates as you type.
- Press Print, or Save as PDF and choose “Save as PDF” in the print window.
- Save a draft to reuse the same checklist on your next job.
About this reach-in refrigerator checklist
Use it as a reach-in cooler or freezer maintenance checklist for restaurants, bars and food service. Record setpoint and actual cabinet temperature, product temperature and amps, then check gaskets, coils, fans and drains.
Questions
What temperature should a reach-in refrigerator hold?
The FDA Food Code calls for cold-held food at 41°F or below, so reach-in coolers are commonly set around 35–38°F. Reach-in freezers are commonly run at 0°F or below.
How do I check a door gasket?
Close the door on a strip of paper at several points around the door. If the paper slides out easily, the gasket is not sealing and should be adjusted or replaced.
Why clean the condenser coil?
A dirty condenser raises head pressure and amps, makes the unit run longer and shortens compressor life. Many kitchens need it cleaned every one to three months.