Furnace Maintenance Checklist
A printable gas furnace tune-up checklist for the fall heating visit, with blanks for voltage, amps, gas pressure and temperature rise.
How to use| Item | OK | Needs attention | N/A | Notes |
|---|---|---|---|---|
| Cabinet and electrical | ||||
| Cabinet, panels and fasteners secure | ||||
| Required clearances around the furnace kept clear | ||||
| Disconnect, grounding and line voltage ( V) | ||||
| Relays, wiring and capacitors checked | ||||
| Motor amps vs nameplate ( A / A) | ||||
| Thermostat calls for heat and furnace responds | ||||
| Air and drain | ||||
| Air filter checked / replaced (size: ) | ||||
| Blower wheel clean, motor amps checked | ||||
| Belt and pulleys checked (belt drive) | ||||
| ECM / variable-speed blower tested | ||||
| Condensate drain and trap clear (condensing furnace) | ||||
| Burners and ignition | ||||
| Burners and flue: no water, corrosion or blockage | ||||
| Inducer motor checked | ||||
| Heat exchanger: no cracks, flame steady with blower on | ||||
| Igniter and flame sensor checked / cleaned | ||||
| Inlet gas pressure () / manifold pressure () | ||||
| Ignition and flame safety sequence tested | ||||
| Flame steady and blue (yellow/orange: investigate) | ||||
| Combustion analysis done, readings recorded | ||||
| Temperature rise ( °F) within nameplate range | ||||
| Combustion air and venting | ||||
| Combustion air supply adequate | ||||
| Chimney / liner / flue or intake-exhaust pipes checked | ||||
| Vent connectors, support, slope and termination OK | ||||
| No combustibles near the vent | ||||
How to use
- The gas furnace template is already loaded, with cabinet and electrical, air and drain, burners and ignition, and venting sections.
- Add your business name, logo and the job details, or leave them blank to fill in by hand.
- Edit, add, remove or move items and sections. The preview updates as you type.
- Press Print, or Save as PDF and choose “Save as PDF” in the print window.
- Save a draft to reuse the same checklist on your next job.
About this furnace maintenance checklist
Use it for a furnace tune-up or a heating service agreement visit. The items follow the gas furnace tasks in the ACCA 4 residential maintenance standard, grouped the way you work around the unit. ENERGY STAR recommends a professional heating check-up every fall and checking the air filter every month.
Under the ACCA standard, most cabinet and electrical checks are done twice a year, and the combustion, venting and heat exchanger checks once a year. For seasonal heating-only equipment, the contractor can recommend yearly checks only. Need cooling too? Use the AC maintenance checklist or the combined HVAC maintenance checklist.
For what the heating and cooling visits should each cover, and what to leave with the customer, read our HVAC tune-up checklist guide.
Follow your local code and manufacturer instructions; this is a general checklist.
Questions
How often should a furnace be serviced?
ENERGY STAR recommends a professional heating check-up every fall. Check the air filter monthly and follow the furnace manufacturer.
What color should the furnace flame be?
A steady blue flame is normal. A yellow or orange flame is a sign to have the furnace checked by a qualified technician.
Can I add my own items?
Yes. Edit any item on the sheet, or open the custom builder to add sections, then print or save a PDF.