An HVAC maintenance agreement is a short contract between a contractor and a customer for scheduled maintenance visits at a set price over a set term. A good one names the equipment it covers, says how many visits there are and when, points to a checklist for what each visit includes, lists what costs extra, and spells out price, renewal and cancellation. Everything else is detail.
Below is each section, what to write in it, and the choices that tend to cause trouble later if you leave them vague.
An outline, not legal advice. Contract rules vary by state. Have a lawyer where you work look over your final wording, especially the renewal, cancellation and liability parts.
The sections, at a glance
| Section | What to write |
|---|---|
| Parties and address | Your business details, the customer's name and the service address. If the payer isn't the occupant, name both. |
| Equipment covered | One line per unit: type, make, model, serial number, location and filter size. |
| Term | Start date and end date, usually one year. |
| Visits | How many per year and which season each one falls in. |
| Scope of each visit | "The tasks on the attached checklist." Attach it. |
| Not included | Repairs, parts and anything else you charge for separately. |
| Repairs found on a visit | How you quote them and that nothing is done without the customer's OK. |
| Price and payment | The amount, whether it's paid up front or per visit, and when it's due. |
| Customer's part | Filter checks between visits, access to the equipment, and notice to reschedule. |
| Records | A copy of the completed checklist after every visit. |
| Renewal and cancellation | Whether it renews, how either side ends it, and what happens to money already paid. |
| Signatures | Both parties, with the date. |
List the equipment, unit by unit
A line for each unit heads off the "I thought that was covered" conversation. Write the type (gas furnace, central A/C, heat pump, air handler), the make, model and serial from the data plate, where it sits, and the filter size.
The serial number is the important one. If the customer replaces a unit halfway through the term, you can see straight away that the new one isn't on the agreement, and you can add it at a new price instead of arguing about it.
Visits: how many and when
For most homes the answer is two: a cooling visit in spring and a heating visit in fall. That is the timing ENERGY STAR gives homeowners in its maintenance checklist, because contractors get busy once summer and winter arrive.
Not every address needs two. ANSI/ACCA 4 QM, the ACCA standard for residential HVAC maintenance, lets the contractor recommend one visit a year for heating-only or cooling-only equipment. A heat pump runs in both seasons, so keep it on two. Name the season for each visit in the agreement rather than a fixed date. "One cooling visit between March and May" is easier to keep than "April 15."
Our guide to building an HVAC maintenance schedule goes through sorting a whole customer list this way.
Scope: point to a checklist instead of writing it out
A paragraph like "inspect and clean system as needed" sounds fine until there's a dispute. Then it means whatever each side wants it to mean. Attach a checklist instead, and write "each visit includes the tasks on the attached checklist" in the agreement.
A checklist is specific and the customer can read it before signing. It also doubles as the visit record. Our HVAC maintenance checklist covers the furnace, the AC and airflow on one page, with a Notes column for readings. You can add your logo, remove lines that don't apply, and print it or save it as a PDF to attach. For split visits, use the AC checklist for spring and the furnace checklist for fall.
If a customer asks what a visit actually covers, the HVAC tune-up checklist post walks through both visits line by line.
Plan features change, so check Jobber's own pricing page before you pick a tier.
What's not included
Keep this short. Say plainly that repairs and parts are extra. If you include certain small items in the price, such as filters, list them by name. A short "not included" list is better than a long one, but anything that often surprises customers belongs on it. Think about what you usually charge for on a maintenance call and write those down.
Repairs found during a visit
ACCA 4 says the homeowner has to be told about fixes that aren't part of the inspection, with approval agreed before that work is done. Put the same rule in your agreement: the tech explains what was found, you give a price, and nothing outside the checklist gets done until the customer says yes.
If you give agreement customers a discount on repairs or priority booking, write down exactly what it is. A set percentage off repair labor can be checked. "Preferred pricing" can't. Vague promises cause trouble.
Price and payment
State one total for the term and how it's paid: all up front, per visit, or monthly. If it's per visit, say when the invoice goes out. If more equipment can be added mid-term, say how that's priced. Leave out anything you can't promise, such as a fixed price on future repairs.
The customer's part
A maintenance agreement works better when the customer has a few jobs too. ENERGY STAR tells homeowners to check the filter once a month and clean or change it as needed, and it notes the contractor can show them how. Put that in the agreement, along with access to the equipment on the visit day and a notice period for rescheduling.
Records after every visit
ACCA 4 expects the contractor to record measurements and observations and to note recommended fixes. Its minimum paperwork includes the checklist itself, with any skipped task explained, plus code violations, parts you couldn't reach and the repairs the homeowner approved.
Promise a copy of the completed sheet in the agreement, then keep yours in the customer's file. Next season you can compare readings against the last visit. If the equipment manufacturer's warranty terms say anything about maintenance, those sheets are the customer's record of what was done and when.
Renewal and cancellation
Decide whether the agreement renews on its own or ends unless the customer signs again. If it renews automatically, check your state's rules on automatic renewal before you rely on that clause, and tell the customer in writing before each renewal date. Either way, say how each side can cancel and what happens to a prepaid amount if visits haven't been done yet. This is the section most worth having a lawyer read.
Commercial agreements
The same sections work for a small commercial building, with two changes. The equipment list gets longer, so tag each unit with a number and use the same number on every visit sheet. And state the visit interval for each unit, because one schedule rarely fits a rooftop unit, a split system and a walk-in cooler at the same address. Take each interval from that unit's manual. For buildings with walk-ins or reach-ins, our refrigeration preventive maintenance checklist can be attached alongside the HVAC sheet.
Is a maintenance agreement the same as a warranty?
No. A maintenance agreement is a paid plan for scheduled visits. A warranty covers defects under the manufacturer's or installer's own terms. An agreement doesn't change what a warranty covers.
How many visits a year should an HVAC maintenance agreement include?
Two is the usual answer for a home with heating and cooling: one in spring, one in fall. For heating-only or cooling-only equipment, one visit a year can be enough. Follow the equipment manufacturer if it says something different.
Should the checklist be part of the agreement?
Yes. Attaching the checklist as the visit scope is clearer than describing the work in a paragraph, and the filled-in sheet becomes the record of each visit.